Polish Stripper

 

SKU: ST-001 Category: Tag:

Description

Polish Stripper removes old wax and polish. Polish Stripper is used when old coatings build up and perish, and looks as though the they are peeling from the floor. Polish stripper may also be used if the wax coatings are slippery.

Available in Quarts and Gallons

Always test for desired results in an inconspicuous area before beginning the task

  • Read all instructions and tips before the application so that you can plan the application correctly.
  • Mask off any adjacent surfaces that need to be protected during the application.
  • After testing, mix the correct dilution; apply the solution to the area using a mop, watering can or spray.
  • Allow time (approx 3 – 5 minutes) for the solution to break down the dirt/polish. Do not allow the solution to dry out.
  • Scrub as necessary in order to remove the dirt/polish but not to damage the surface. Rinse off with fresh clean water until no bubbles or residues remain.
  • Allow the surface to dry and inspect. Repeat if necessary.
  • It is recommended that the entire floor be cleaned with Tile & Floor Care Easy Clean and rinsed thoroughly after stripping.
download-icon

Spanish Instructions

download-icon

Data Sheet