Cleaning & Sealing Slate Tiles

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Cleaning & Sealing Coral Stone

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Cleaning & Sealing Saltillo / Terracotta Tiles

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Cleaning & Sealing Quartzite

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Cleaning & Sealing Polished Porcelain Tiles

[vc_row][vc_column width=”3/4″][vc_column_text]Cleaning & sealing Porcelain Tiles using Tile & Floor Care Products: Polished Porcelain tiles are very low in porosity and will only accept a small amount of sealer. Special care must be taken not to over-apply the sealer. Sealing and maintaining the tiles will prolong the life span. After laying: During grouting make sure all…

Cleaning & Sealing Low Porosity Terracotta Tiles

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Cleaning & Sealing Granite Travertine & Marble

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Cleaning & Sealing Flagstone/Cement

[vc_row][vc_column width=”3/4″][vc_column_text]After laying: During grouting make sure all excess grout is removed from the surface with a damp clean cloth or sponge and fresh clean water.  Washing grout off the surface with dirty water and / or dirty cloth or sponge does not clean the surface.  Any grout residues will impair the finish after sealing…

Principios básicos para sellar pisos

[vc_row][vc_column width=”3/4″][vc_column_text]Preparación – Estos principios son una generalización y son apropiados para la mayoría de la aplicaciones sin embargo pueden ocurrir anomalías, así que por favor si tiene alguna duda comuníquese con Tile & Floor Care. Siempre habrá residuos de lechada después de la instalación, sin importar lo bien que el instalador limpie. Es esencial…

Basic principles on sealing floors

[vc_row][vc_column width=”3/4″][vc_column_text]Preparation – The principles following are a generalization and are suitable for most applications, however anomalies can occur, so please contact Tile & Floor Care if in doubt. After installation there will most likely be grout residues, even after the installer cleans. It is essential to remove the grout residues along with any other…